|
|
|
|
Alinco DJ
|
 • Two-touch Repeater
Access
• Rugged polycarbonate body
• Highly visible backlit alphanumeric display
• Direct frequency input through illuminated keypad
• 200 memories plus 1 CALL channel
• VFO, Memory and Scan modes
• Ultra-flexible antenna with SMA port
• 39 CTCSS tone squelch (encode/decode)
• 1000,1450,1750 and 2100Hz Tone-bursts
• Battery-drain functions avoids memory-effect
• Ergonomic design, fits in the palm of your hand
• Wire-cloning capability
• 3 levels of output power (5 / 2 / 0.5W)
• Clean, crisp and powerful 500mW Audio |
|
General |
Frequency range:
|
TX 144～147.995MHz
*144～147.995MHz
RX 136～173.995MHz
*144～147.995MHz
|
Mode:
|
F3E (FM) / F2D, T/E models only
|
Frequency Steps:
|
5, 10, 12.5, 20, 25 & 30KHz
|
Memory Channel:
|
200 channels + 1 CALL channel + 1
|
Frequency stability:
|
+/- 2.5ppm
|
|
Repeater-Access function memory |
Antenna connector:
|
50 ohms unbalanced
|
Frequency stability:
|
+/- 2.5ppm
|
Microphone impedance:
|
2k ohms nominal
|
Power Supply Requirements:
|
7.2V Battery only / Ext. DC port is NOT Available
|
Current drain (Aprox.):
|
1.5A Transmit high at 5W
250mA Receive at 500mW
70mA Stand-by
30mA Battery save on |
Useable Temp. Range:
|
-10~+45 deg. C (+14~113 deg. F)
|
Dimensions:
|
2.28(W)x4.23(H)x1.43(D) Inches
58(W)x107.5(H)x36.3(D)MM |
Weight:
|
Approx. 8.7oz /245g with EBP-72 & Antenna
|
|
Transmitter |
Power output:
(Approx.value) |
5W (High)/ 2W(Middle)/ 0.5W(Low)
|
Modulation:
|
Variable reactance frequency modulation
|
Spurious emission:
|
-60db or less
|
Max. freq. Deviation:
|
+/- 5kHz +/- 2.5kHz (Narrow band models)**
|
|
Receiver |
|
System: |
Double-conversion super heterodyne
|
Sensitivity:
(12dB SINAD) |
-14dB (0.2 v) |
|
Intermediate frequency: |
1st: 21.7MHz /2nd: 450KHz |
|
Selectivity: |
-6dB 12KHz or more / -60dB 26KHz or less
-6dB 6KHz or more / -60dB 14KHz or less (Narrow band models)**
|
Audio Output Power:
|
500mW (8ohm, MAX)/400mW (8ohm. 10% THD)
|
|
